Even the best roof can’t last forever. When your roof is nearing the end of its usable life, you’ll naturally need a replacement. If this is your first time having a roof replaced, though, you may be unsure of how the pros go about this. Roof replacement is a straightforward but involved procedure, so look at how Old Fort Roofing replaces a roof to learn more about the process.
Choosing the Right Roofing Materials
Every roof is unique, with materials being one of the big differentiators between different homes. For many, this will be the asphalt shingle we’re all so familiar with. Shingles are popular because they’re so inexpensive and easy to replace. Ripping off a few shingles when they become damaged and replacing them with new ones is simple, so any future repairs to your roof will likely be easier as a result.
However, many opt for a metal roof. Metal roofs have a higher upfront cost, but when well-maintained, they last much longer than other options. They’re also quite good at repelling damage and will even resist rusting. Metal roofs come in a variety of materials, as well, including steel, copper, zinc, and aluminum.
Regardless of the type of roof you choose, finding a roofer that prioritizes quality materials is a must. Roofs made with substandard materials aren’t worth any savings you might get from cutting corners, so you should always opt for the best roofing materials to get the job done right.
Roofing materials don’t leak, it is the quality of the installation.
Should I Hire a Professional Roofer?
Trying to DIY a roof replacement is a tall order the average homeowner can’t do. The amount of work involved is enough to make the task unfeasible all on its own. Between that, safety concerns, the potential to violate the law, and the risk of doing a poor job, you should hire a professional roofer to take care of your roof replacement.
Obtaining the Right Permits and Prepping the Area
The first step of any roofing job is securing the permits. Permits ensure that contractors are held to high standards and perform all the duties they should during a job, resulting in a safe and complete roof at the end of the process. Most remodeling jobs will require a permit, which naturally includes a roof replacement.
After securing a permit, the contractor will prep the area for the replacement. This means removing any damaged or old materials along the area of the roof being replaced. This can be a small section up to the entire roof. Before proceeding, They will remove the moisture barrier and inspect for further damage.
Installing the New Materials
With the area prepped, the installation can finally begin. After repairing any damage – small holes or entire sections of the roof decking – the moisture barrier is replaced along with the flashing. After that, new shingles or metal sheets are nailed/screwed into the roof, forming the outer layer of the roof.
Sealing and Refining Your Roof
A finished roof needs to be checked for gaps or imperfections, as well as sealed up to prevent leaks. Once sealing is complete, the contractor does one last inspection and cleans up the area, including any old materials, stray nails, and similar bits. Only then can the job be considered truly complete.
Professional Roofers in Fort Wayne
A good roof can be hard to come by unless you work with Old Fort Roofing LLC. We’re the best roofers in the Northern IN area, providing our community with excellent service and quality repairs and replacements for over 40 years. Our warranty is the best in the business, and we require zero down payment before our jobs. Contact us today if you need our help with your home.
Image Source: Oak City Drone/Shutterstock